Printer Error 49 Fix - How To Repair The 49 Error With Your HP Printer

Printer Error 49 usually appears when you are attempting to print a document using a HP printer and then a communication failure error occurs between the computer and the printer. However, there are other probable causes for this message with an error 49 code to appear. There is a chance that it is related to the file that is being printed, or it could be due to a firmware problem. You must determine the cause of the problem and then fix the error to be able to make use of your printer again. This tutorial will guide you how to resolve printer error 49 on HP printers.
HP printer error 49 is typically caused by invalid print commands, damaged or corrupted data, invalid operations or sometimes registry issues. Some problems that can be easily fixed are caused by poor quality of the parallel cables that connect the printer to the computer. To stop the error messages from appearing, you must make sure that all possible causes are ruled out.
The way to fix HP printer error 49 is to first calibrate the printer. You can calibrate your printer by performing all these steps:

• Clear the print job from memory by pressing the Cancel Job command.
• Restart the printer by turning it off and on again.
• Print another job and this time from a different program.
• If the job printing was successful, return to the first application and print another file.
• If the error message shows up only with a specific software program or print job, contact the software vendor to get assistance from them.
• If the error message persists even with a different software application and print job, take off all the cables that connect the printer to the PC or the network and then turn off the printer.
• Open the printer and remove the entire set of memory DIMMS or third party DIMMS, but, DO NOT remove the firmware DIMM inserted in slot J1.
• Also, remove all the EIO devices from the computer.
• Turn on the printer again.
• If the error message does not appear again, then one by one return each of the DIMMS and EIO devices and turn the printer on and off each time you install a device.
• If you have pinpointed a specific device, replace it.
• Reconnect all the cables to hook the printer back up again to the computer or network.
• If the error code 49 still persists, replace the DIMM firmware.
• Lastly, replace the formatter of the printer and then calibrate the printer again.

After calibrating your HP printer, you have to make sure that your Windows registry is free from errors. The registry is an important component of Windows that stores all file and program settings that allow your operating system remember to load and use the different programs on your PC. Despite its significance in your system, it can be affected by the constant use it inevitably undergoes. You need to resolve registry issues by using a reliable registry cleaner that can thoroughly clean your registry. We highly recommend that you make use of "Frontline Registry Cleaner", which can resolve 99% of system faults found in your system, allowing you to use your computer in its optimal condition.

Article Source: http://EzineArticles.com/5641707

Read More

A Thorough Guide to Fixing That Printer That is Not Working

When your printer is not working, workflow can be seriously interrupted. Most PC users are dependent on printers to create important documents that are indispensable. As a result, a malfunctioning printer can cause all sorts of problems.

However, you can repair your printer with relative ease if you follow a few simple steps. Let's go over common printer error symptoms and how you can fix a broken printer.

Repairing The Print Spooler

One of the most common errors is related to the print spooler. The print spooler is a very important component that stores data on your print logs. In other words, the print spooler saves all assigned print jobs so that you can print things sequentially.

If it takes a ridiculously long time to print a document, or you see error messages related to the print spooler, then you need to take proactive steps to repair the print spooler. This does require restarting your computer and then making adjustments to the Print Spooler service. We can go over these basics here.

    You'll need to access Administrative Tools, so click "Start."
    Go to "Control Panel."
    Open "System and Maintenance."
    Then, open "Administrative Tools."
    Open "Services."
    Then, right-click on the service labeled "Print Spooler."
    Click "Properties."
    Select the tab labeled "General", and look next to the "Startup type" box. Ensure that you've selected "Automatic."
    You might need to click "Service status", then "Start", then "OK", if the service isn't running already. Otherwise, you're done.

Attacking Common Printer Issues

This process should quickly resolve your issues related to the Print Spooler. If it doesn't then you may need to reinstall drivers and check your hardware. If your printer is only printing blurry or faded documents, that's a sure sign that you need to replace your ink or toner cartridges.

Normally, the print queue will display messages related to low ink and toner. You should check the Devices and Printers menu if you're dealing with poor output documents.

This menu will also inform you if the printer is out of paper, or if there's a paper jam. If you don't see any of these messages, but your printer still isn't working, then it's very likely that you need to replace your printer drivers.

Updating Printer Drivers

Outdated printing drivers make it impossible for your operating system to process print jobs. As a result, you need to update drivers rapidly. One easy way to update drivers is to use Windows Update.

Windows Update will apply automatic updates to your system. However, sometimes it doesn't replace printer drivers. You can also try manually installing drivers by visiting the printer manufacturer website and downloading drivers there.

Finally, it's possible to find strong driver update software to replace all of your old drivers. The right kind of driver update program will do all the work for you. In other words, it'll search your system for old drivers and then find the new ones. It will then do a complete installation of these new drivers.

Source: http://goo.gl/J0UAV

Read More

Printer Help and Support

HP (Hewlett-Packard) is one of the largest company which manufacturing Printers, personal computing device, enterprise servers, related storage devices as well as other imaging products. Printer gives your hard copy print out in test of graphic format. In 1976 the inkjet printer was invent, but very often consumers can able to survive that one. In 1988 hewlett-Parkard's release of the DeskJet inkjet printer, which was very affordable to mostly consumer.

There are some type of printer which manufactured by HP :

    * Color inkjet all in one printer
    * laser jet printer
    * Color laser jet printer
    * Photosmart printer

If you are planning to buy a HP printer for home or business, then you should have good online hp printer support services and also some knowledge about the HP printer like:

How many pages do you print in a per day or month? If you want those printer which is gives you more printout in very less time, then you should go with the HP Laserjet printer series. HP Laserjet printer can able to printing fast. Because it has it's own processor, Memory (Printer RAM) and lots of page holding facility. It is available in market that its specification. Which printer gives you more page in per minute, you can choose that one.  

How often do you print in color? It is very important question because color printer ink cartridge is very expensive to buy rather then black ink cartridge.

Do you need Photo-quality? If you are create your own marketing advertisements and you expect better photo-quality, then you should go with HP Photosmart printer. Either you use inkjet photo smart printer or laserjet photo smart printer.

How many people use your printer? If your printer use by several user continuously, then you should need a network printer. It has inbuilt network interface. You can connect it into the your network and just shard it. 

There are some basic HP Printer troubleshooting tips for each Hp Laserjet printer model which help you lot. If your printer getting error code like:

Error code 02: It is related to printer Warm up issues. If you are facing this check about your I/O cable for loose connection.

Error code 11: It is simple Out of paper issue. You should need to insert the more paper in printer paper tray.

Error code 14: It you are getting this error message then you should check about Absence of toner cartridge.

Error code 22: It means some printer Configuration settings is incorrect.

Error code 30: It shows Postscript firmware problem.

Error code 40: usually means that there is a disconnection between data transferring for computer to printer.

Read More

How to Fix Printer error 49.4c02?

Follow the given below Instructions to Fix Printer Error 49.4c02 

1.  Press CANCEL JOB to clear the print job from the printer memory.  Turn the printer off and then back on.
 

2.  Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
 

3. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or PC. Turn the printer off.
 

4. Remove all memory DIMMs or third-party DIMMs from the printer.  Remove all EIO devices from the printer. Turn the printer on.
 

5. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.  Replace a DIMM or EIO device if you determine that it causes the error.
 

6. Remember to reconnect all cables that connect the printer to the network or computer. If the error persists, replace the firmware DIMM.  Replace the formatter and calibrate the printer.
 

Hope these Instructions helps you to fix Printer error 49.4c02

Source:- fixyourownprinter.com 

Read More

How to network two computers to same printer?

While going about connecting 2 computers to one printer, you need to follow a few steps to ensure the process is smooth and hassle-free. Here we outline some of these basic steps.

Connection: To be able to connect both computers to a single printer you need to setup printer on "client" PC:
    * Connect printer to "client" PC and install it. This way all required software and drivers are installed.
    * Reconnect to "host" PC
    * Select "Properties" by right clicking
    * Select "shared"
    * In "client" PC:
    * Select "My Network Places" or "Network Neighborhood"
    * Printer appears as "shared"
    * Double click on the printer to install it
    * The same printer is now installed twice - as local and network printer
    * If always using network printer, set it as "default"

Set up a LAN:

    * To be able to perform a 2 pc 1 printer connection, you first need to set up a LAN or a Local Area Network. To do this, follow these instructions:
    * You could either use a network adapter in your home office OR
    * To view the status of the network connection, you need to
    * Double click on Network Connections
    * Right click on the particular LAN
    * Select Status option
    * You could also right click on the LAN, click on Properties and then select the "Show icon in taskbar notification area when connected" checkbox. This will enable you to automatically view the status in the taskbar area.

Get a printer switch: Printer switches enable you to connect 2 computers to one printer. They come in a variety of types such as auto printer switch and parallel printer switch. There are several vendors available online who provide these switches at good discounts.

Crossover cable: You can easily get a crossover cable from your local computer store to connect your computers to your printer. After that you can network and open the desired printer and enable it to be shared between both computers.

Print server: A print server enables you to print simultaneously from two computers at the same time. However you need to ensure you have a router (which will act as a DHCP server). You also need to make sure that it's not a multifunctional printer you're working with since most print servers are not able to work with such kinds of printers. In case you do not have a router, you could purchase a PSUS4 print server, then assign static IP on the network cards and print server.

No network ports present: In case there are no network ports present, then you can use either USB or parallel port adapters for your purpose.

Read More

How to Override a Printer Error for a Lexmark Print Cartridge?

Override a Printer Error for a Lexmark Print Cartridge, Try detailed & step by step solution to fix Lexmark printer cartridge error:

Remove and replace the print cartridge. If that doesn't solve the error.

• Try the steps listed below:

• -->  Remove the print cartridge from the machine.
• --> Wet the end of a cotton swab with rubbing alcohol.
• --> Wipe the copper colored contacts on the print cartridge with the cotton swab to clean.
• --> Wipe the contacts in the printer where the cartridge sits.
• -->  Replace the cartridge and try a test print. If removing residue for a clean connection didn't solve the error, move on to step 7.
• -->  Turn off the printer.
• -->  Unplug the printer from the power source and leave it unplugged for 15 to 30 minutes. This will reset the printer.
• -->  Plug the printer back into the power source and turn it on.
• -->  Print a test page.

The solution above will help you out to fix printer cartridge error with your Lexmark printer.

Read More

How to fix Lexmark X5470 printer that is displaying Error 1203?

Cartridge Error: 1203

Your print cartridge has a short.

1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.

Read More