How to Fix Printer error 49.4c02?

Follow the given below Instructions to Fix Printer Error 49.4c02 

1.  Press CANCEL JOB to clear the print job from the printer memory.  Turn the printer off and then back on.
 

2.  Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
 

3. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or PC. Turn the printer off.
 

4. Remove all memory DIMMs or third-party DIMMs from the printer.  Remove all EIO devices from the printer. Turn the printer on.
 

5. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.  Replace a DIMM or EIO device if you determine that it causes the error.
 

6. Remember to reconnect all cables that connect the printer to the network or computer. If the error persists, replace the firmware DIMM.  Replace the formatter and calibrate the printer.
 

Hope these Instructions helps you to fix Printer error 49.4c02

Source:- fixyourownprinter.com 

Read More

How to fix Lexmark X5470 printer that is displaying Error 1203?

Cartridge Error: 1203

Your print cartridge has a short.

1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.

Read More

Fix Printer Error 5100 in a Canon I860

The Cannon i860 bubble jet printer displays error codes to alert the user when there is a problem. Error code 5100 indicates that the waste ink absorber has reached maximum capacity.

The Canon i860 printer uses the waste ink absorber to keep ink residue off the printer heads and internal printer components. To resolve this error code, the waste ink absorber must be cleaned out and the error code message needs to be reset.

Steps to Fix Printer Error 5100 in a Canon I860

Step 1 - Open the top of the printer.

Step 2 - Locate the waste ink absorber pad on the right side of the inside of the printer. Grasp the pad and pull up to remove.

Step 3 - Clean the waste ink absorber compartment with a tissue or cloth.

Step 4 - Take the waste ink absorber pad to a sink. Run warm water over the pad and wring it out to clean it. Wring the excess water out when done cleaning.

Step 5 - Set the waste ink absorber pad on a dry paper towel or clean cloth to dry.

Step 6 - When the pad is dry, place it back into it's compartment in the printer.

Step 7 - Close the top of the printer.

Step 8 - Press and hold the "Resume" button on the printer. Press and hold the "Power" button while holding down "Resume."

Step 9 - Release the "Resume" button. Press "Resume" twice. The indicator light will turn amber followed by green.

Step 10 - Release the "Power" button.

Step 11 - Press the "Resume" button four times.

Step 12 - Press the "Power" button. The error code is now reset.


Read more: eHow.co.uk

Read More